Position the RockLites in the desired location with proper drainage. Layout the above system before digging and make any adjustments. Check for any electrical, plumbing, or cable hazards before digging. Consult transformer instructions for installation of the transformer and timer.

Adding Color Filters: Replace clear window with filter, adjust spring clip and o-ring if necessary.
WARNING:  WHEN USING OUTDOOR PORTABLE LAMPS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK , AND PERSONAL INJURY:

USE ONLY A THREE-WIRE OUTDOOR EXTENSION CORD AND GROUNDED RECEPTACLE.

USE A GROUND FAULT CIRCUIT INTERRUPTER (GFCI) PROTECTED CIRCUIT.

DO NOT USE WITH THE EXTENSION CORD NEAR WATER OR WHERE WATER MAY ACCUMULATE.

KEEP THE LIGHT AT LEAST 16 FEET FROM POOLS AND SPAS.

KEEP THE PLUG AND RECEPTACLE DRY.
                                       
                                Lighted Lamp Is Hot!

Turn off/unplug and allow to cool before replacing lamp.
Lamp gets HOT quickly! Contact only switch/plug when turning on.  
Do not touch hot lamp, lens, guard, or enclosure.  
Do not remain in light path if skin feels warm.
Do not look directly at lighted lamp.
Keep lamp away from materials that may burn.  
Use only with wattage of lamp marked on fixture.  
Do not touch the lamp bulb or inner reflector at any time.
Use a soft cloth, oil from skin may damage lamp.  
Do not operate the luminaries fitting with a missing or damaged shield.
Keep lens assembly out of sun path, damage of film may result.
Always lock lens and lamp assembly with front and back retaining screws.
Do not look into the sun or lamp with lens or lens assembly.
Return to RockLite specifications
Home Products Images Design Pricing Accessories Services Ordering Contact Us Company What's New Links Mailing List